Discount applied successfully

Buy custom evaluating how to make axle stand

Essay's paper info
Topic: Technology
Number of pages / Number of words: 3 / 607
Essay's paper body

In mass production these legs would be simply placed along rollers onto a stop that would be set up to 300 mm from a power hacksaw which would be lifted up and placed on the bars and would be cut several at a time when it is turned on then after they are cut they would fall into pallets which could easily be transported when full to the next step in production


Essay fragment Read more

Need an Essay?

Choose one of the options below

Custom Written Essays

  • Order plagiarism free custom written essay
  • All essays are written from scratch by professional writers according to your instructions and delivered to your email on time. Prices start from $11.99 /page
Order Custom Paper

Full Access to Essays Database

  • This option gives you the immediate access to all 184 988 essays
  • You get access to all the essays and can view as many of them as you like for as little as $28.95/month
Buy Database Access

If at our website you can not find any essay you need for your study, you can order a paper on any topic with us.
Our company employs only qualified writers that are Master's and PhD holders.

Order custom written essay

Benefits
  • Research papers are written by professional writers
  • Requirements are always met
  • Posibility to control the working process of your paper
  • A chance of becoming the best student in your class.

To make the support bar you would firstly decide upon a length to cut the bar. I covered the bar in engineers blue which is a stain and would help show up the marks that I was about to put on then after the engineering blue had dried I measured up 300mm of the bar and marked it up with a scriber and Then I clamped the length of bar into a bench vice to hold it still as I cut it with a hacksaw down to the correct length and filed off the burr using a standard file then using some more engineers blue if necessary then I set up a scribing block to mark the centre of the tube I marked the centre by placing the tube on top of 2 V blocks at either end which prevents the tubes from any movement that would otherwise occur therefore keeping it still all these would be placed on a surface table then you have a scribing block which can be set up to the right height then you move the scribing block across the tube putting on a little bit of pressure and when the line is done you need to get a ruler and measure along the line on the tube and mark out every 30mm using a scriber in line with the line that was made earlier and that should leave you with the guides for where the holes will be that the pin will be inserted into giving the axle stand different heights of workability...


Essay fragment

General points of the essay

Mass Production at the 1920`s Analysis: Beyond Mass Production BP America Production Co., Successor in interest to Amoco Production Co., et al. v. Burton, Acting Assistant Secretary, Land and Minerals Management, Department of the Interior, et al. Mass Production and the Beginnings of Scientific Management Five Factors of Production Full Stop, Why Apes Look Like People And The Escape How to Make Pumpkin Bars Speech production stratergy Taking The First Step To Stand Music Production Stop being so full of yourself: Narcissistic Personality Disorder Oil production and its effects on evaluating how to make axle stand Gas Production Production Quality

Essays related to the topic
Title Pages / Words Select
Honda case study essay 3 / 627
Bauhaus essay 1 / 164
Differing Mentalities In Hip Hop And Rock essay 3 / 725
Digital Piracy essay 2 / 350
Hip hop rock differences essay 3 / 725
music diversity essay 2 / 439
evaluating how to make axle stand essay 3 / 607
Services